Moving load response of an axially loaded Timoshenko beam on a multilayered transversely isotropic half-space comprising different media

This paper investigates the dynamic response of an axially loaded Timoshenko beam coupled with a multilayered transversely isotropic (TI) half-space subjected to a moving load. An axial force induced by the thermal expansion is taken into account in the Timoshenko beam. The half-space considers the alternate distribution of an arbitrary number of TI elastic and poroelastic layers to model foundation soils with different properties and moisture conditions. To solve the governing equations, Fourier transform is adopted. The stratified foundation is formulated by extending an “adapted stiffness matrix method” to a more general scenario with an arbitrary number of layers. The beam is then coupled with the foundation to derive solutions to the system in the frequency-wavenumber domain. The final results in the time-spatial domain are recovered by the inverse Fourier transform. After confirming the accuracy of the method in this study, the influences of the pore water existence, the transverse isotropy of different parameters, and the axial force are investigated. It can be observed that the effect of pore water existence on the maximum beam deflection can reach 22% in this study. The transverse isotropy of the elastic and shear moduli influences the critical speed of the beam deflection by altering the phase velocity of the first wave propagation mode of the beam-foundation system. The vertical permeability coefficient is more important than the horizontal one in determining the excess pore pressure. The rise of the beam temperature (axial force) decreases the critical speed and magnifies the vibrations.     

南海风暴潮对风场和外围海水敏感性研究

为探索来自西北太平洋台风风暴潮与南海局地生成台风风暴潮不同,本研究在假设两种台风气象条件相同情况下,研究随台风而来外围海水所形成增水对南海沿岸的影响。以0814"黑格比"强台风风暴潮为基础,使用ROMS(regional ocean modeling system)模式进行数值模拟并通过设计对比试验方法进行研究,研究发现在台风登陆时引起的增水最大,最大增水出现在台风路径右侧,其中在沿岸区域,外围海水形成增水约占总增水10%,且大约3 h后出现增水回震现象。同时,设计对比试验,研究来自西北太平洋台风风暴潮对台风路径、台风强度、台风移动速度和流入角等气象条件敏感性,并获得与前人一致的结果。     

Stochastic and analytical approaches for sediment accumulation in river reservoirs

ABSTRACT

Sediment accumulation in a river reservoir is studied by stochastic time series models and analytical approach. The first-order moving average process is found the best for the suspended sediment discharge time series of the Juniata River at Newport, Pennsylvania, USA. Synthetic suspended sediment discharges are first generated with the chosen model after which analytical expressions are derived for the expected value and variance of sediment accumulation in the reservoir. The expected value and variance of the volume of sediment accumulation in the reservoir are calculated from a thousand synthetic time series each 38 years long and compared to the analytical approach. Stochastic and analytical approaches perfectly trace the observation in terms of the expected value and variability. Therefore, it is concluded that the expected value and variance of sediment accumulation in a reservoir could be estimated by analytical expressions without the cost of synthetic data generation mechanisms.     

Dynamic responses of unsaturated half‐space soil to a moving harmonic rectangular load

The problem of the dynamic responses of a semi‐infinite unsaturated poroelastic medium subjected to a moving rectangular load is investigated analytical/numerically. The dynamic governing equations are obtained with consideration of the compressibility of solid grain and pore fluid, inertial coupling, and viscous drag as well as capillary pressure in the unsaturated soil, and they can be easily degraded to the complete Biot's theory. Using the Fourier transform, the general solution for the equations is derived in the transformed domain, and then a corresponding boundary value problem is formulated. By introducing fast Fourier transform algorithm, the unsaturated soil vertical displacements, effective stresses, and pore pressures induced by moving load are computed, and some of the calculated results are compared with those for the degenerated solution of saturated soils and confirmed. The influences of the saturation, the load speed, and excitation frequency on the response of the unsaturated half‐space soil are investigated. The numerical results reveal that the effects of these parameters on the dynamic response of the unsaturated soil are significant.     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

新型移动三维激光扫描技术在盾构管片椭圆度检测中的应用

铁运营阶段对隧道结构的变形监测保证了地铁运行的安全，而椭圆度检测是地铁隧道结构检测的重要工作。本文简单介绍了传统椭圆度检测的基本方法，分析了新型移动三维激光扫描检测系统基本原理及隧道椭圆度检测的方法和处理流程。通过工程案例实际应用以及对检测结果的综合分析，证明了移动三维激光扫描技术在盾构管片椭圆度检测中的优势。     

Numerical modeling of three‐phase dissolution of underground cavities using a diffuse interface model

Natural evaporite dissolution in the subsurface can lead to cavities having critical dimensions in the sense of mechanical stability. Geomechanical effects may be significant for people and infrastructures because the underground dissolution may lead to subsidence or collapse (sinkholes). The knowledge of the cavity evolution in space and time is thus crucial in many cases. In this paper, we describe the use of a local nonequilibrium diffuse interface model for solving dissolution problems involving multimoving interfaces within three phases, that is, solid–liquid–gas as found in superficial aquifers and karsts. This paper generalizes developments achieved in the fluid–solid case, that is, the saturated case [1]. On one hand, a local nonequilibrium dissolution porous medium theory allows to describe the solid–liquid interface as a diffuse layer characterized by the evolution of a phase indicator (e.g., porosity). On the other hand, the liquid–gas interface evolution is computed using a classical porous medium two‐phase flow model involving a phase saturation, that is, generalized Darcy's laws. Such a diffuse interface model formulation is suitable for the implementation of a finite element or finite volume numerical model on a fixed grid without an explicit treatment of the interface movement. A numerical model has been implemented using a finite volume formulation with adaptive meshing (e.g., adaptive mesh refinement), which improves significantly the computational efficiency and accuracy because fine gridding may be attached to the dissolution front. Finally, some examples of three‐phase dissolution problems including density effects are also provided to illustrate the interest of the proposed theoretical and numerical framework. Copyright © 2014 John Wiley & Sons, Ltd.     

EC细网格对黔南州温度预报的订正研究

该文采用EC细网格2 m温度预报场及国家站实况资料,通过滑动平均法、双权重滑动平均法、多项式拟合法以及最佳系数法对EC细网格2 m温度在黔南州的预报进行订正分析,结果显示:4种方法订正后最高气温7 d平均准确率分别提升了12.70%~17.84%,最低气温7 d平均准确率分别提升了1.14%~2.86%。对于高温预报,最佳系数法订正效果最优,其次是多项式拟合法,对于最低气温,前3 d采用滑动平均法订正效果最明显,第4 d开始则采用最佳系数法订正,订正效果更明显。4种订正方法均在7-9月效果最明显。黔南州西部及中部地区多项式拟合法订正效果更好,州东南部地区最佳系数法与滑动平均法订正效果更好,但在120 h时效后滑动平均法的订正效果明显下降,州北部地区最佳系数法订正效果更为明显。     

普朗斑岩型铜矿床成矿元素多重分形特征及其矿化强度指示

成矿元素品位的变化受控于长期地质作用过程,具有较强的非线性特征,定量刻画其变化特征有助于深入理解成矿过程,并为找矿预测提供理论依据。运用多重分形去趋势移动均值（MFDMA） 法,分析云南普朗斑岩型铜矿床4号勘探线钻孔Cu元素品位的多重分形特征及其对矿化强度的指示意义。结果显示：所有钻孔Cu元素品位具有多重分形特征,且不同矿化等级的元素分布存在局部奇异性差异,多重分形强度随矿化强度等级减弱而增加;这些特征指示在钾硅化带—带内侧强矿化钻孔的高品位相对聚集,而带外侧角岩化—青磐岩化带的高品位相对分散;通过数据随机重排技术推测Cu品位多重分形结构奇异性差异是由其分布概率密度和长相关性共同作用引起,后者的作用贡献大于前者。     

四川地区多模式2m温度预报性能分析及集成方法研究

本文通过分析2017年9~12月四川地区ECMWF(European Centre for Medium-Range Weather Forecasting)细网格模式、GRAPES_GFS(Global and Regional Assimilation and Prediction System)全球模式和西南区域模式(South West Center-WRF ADAS Real-time Modeling System, SWCWARMS)2m温度168h预报时效内的系统性偏差特征,采用滑动双权重平均法分别对三种模式温度预报产品进行偏差订正,并集成得到各时效2m温度的订正场,结果表明:(1)三种模式的预报存在明显的日变化,整体上EC模式的预报最优。(2)三种模式对于低温和高温的预报,在全省均大致呈现负的系统性误差,特别在高原及过渡区表现的尤为明显。(3)订正后三种模式的预报准确率显著提高,均方根误差减小1.4~2.5℃,大部分地区平均误差维持在±0.5℃之间,在系统性偏差较大的地区,订正效果更好。(4)两种集成方案预报结果接近,且均优于三种模式的订正预报。